Where's the VIN?

[DX grunt]

@Cuppa

Hi all.

I can't find the VIN that's supposed to be stamped on the chassis rail. Any ideas where I could find it? I just can't find it. It may be hiding somewhere else, too.

Mine's a 2005 ex Telstra Patrol ute 4.2 TDi.

TIA.

Ross.

[BrazilianY60]

From a Y61 Owner's manual that I have once downloaded. The manual doesn't state any specifics for UTE, so I assume it would be the same location.

Patrol GU VIN location.png

[DX grunt]

From a Y61 Owner's manual that I have once downloaded. The manual doesn't state any specifics for UTE, so I assume it would be the same location.

Patrol GU VIN location.png

Thanks. I've still got my original manual and I looked there but still couldn't find it. Not sure if it's on the front RH side or rear LH side, but I'll look again.

The only thing I can think of is that when I bought it from a car yard that the underneath was painted black and it's been covered over. I might be wrong.

[mudski]

Thanks. I've still got my original manual and I looked there but still couldn't find it. Not sure if it's on the front RH side or rear LH side, but I'll look again.

The only thing I can think of is that when I bought it from a car yard that the underneath was painted black and it's been covered over. I might be wrong.

I've never found the Chassis number on mine. But I've never really had the need to look properly for it though.

[BrazilianY60]

Not sure if it's on the front RH side or rear LH side, but I'll look again.

RH side for sure.

The only thing I can think of is that when I bought it from a car yard that the underneath was painted black and it's been covered over.

Unless they have painted it very thick, you should be able to see it through as it is stamped on metal.

[DX grunt]

RH side for sure.




Unless they have painted it very thick, you should be able to see it through as it is stamped on metal.

Thanks. They must have painted it very thick. I just cannot see it.

[Cuppa]

Sorry Dx - can't help. Back is playing up & I cant get down to have a look. Why isn't the vin plate adequate?

[DX grunt]

Sorry Dx - can't help. Back is playing up & I cant get down to have a look. Why isn't the vin plate adequate?

@Cuppa

My ute is registered in WA and by chance, I did a quick rego check via the web and found the rego had been cancelled. I didn't have a clue why but was told it had been cancelled and was registered in another state. I told the dude it was sitting in my driveway, but he wanted as much info as he could to help me 'prove it'. I complied as much as I could, and have done lots of ringing around, but I just can't find it. I even sent them a pic of the GVM modification plate. Anyway, waiting to hear back. The dude was good about it and re-instated the rego. Got the renewal yesterday and it was about $995 for 12 months and $551 for 6 months. I'm still in shock. lol.

[Cuppa]

@Cuppa

My ute is registered in WA and by chance, I did a quick rego check via the web and found the rego had been cancelled. I didn't have a clue why but was told it had been cancelled and was registered in another state. I told the dude it was sitting in my driveway, but he wanted as much info as he could to help me 'prove it'. I complied as much as I could, and have done lots of ringing around, but I just can't find it. I even sent them a pic of the GVM modification plate. Anyway, waiting to hear back. The dude was good about it and re-instated the rego. Got the renewal yesterday and it was about $995 for 12 months and $551 for 6 months. I'm still in shock. lol.

Strewth! That doesn't sound good.

[PeeBee]

@Cuppa

My ute is registered in WA and by chance, I did a quick rego check via the web and found the rego had been cancelled. I didn't have a clue why but was told it had been cancelled and was registered in another state. I told the dude it was sitting in my driveway, but he wanted as much info as he could to help me 'prove it'. I complied as much as I could, and have done lots of ringing around, but I just can't find it. I even sent them a pic of the GVM modification plate. Anyway, waiting to hear back. The dude was good about it and re-instated the rego. Got the renewal yesterday and it was about $995 for 12 months and $551 for 6 months. I'm still in shock. lol.

@MB I hope this isn't heading your way with the shorty