Mt DIY things

[Rosco]

Here are some pics of my DIY things. These have saved me heaps.
Dual battery tray.

[Rosco]

Here are the brackets that allow me to easily remove and swap sides if I desire.

[Rosco]

Reverse camera connected to my GPS.

[Rosco]

These draws were mainly made from scraps laying around.
Trays folded up cost me $60 for both and runners were $100.
Total cost well under $300 with latches.
I used them before I bought some material to cover them and have decided not cover them as they are much easier to clean. Especially when my daughter spilt honey. Just brush the dirt, sand etc out the back door or air gun the draws with compressed air.

[Rip'n'Shred]

Good stuff mate. Keep em coming.

[Rosco]

Fridge slide

[Rosco]

Inverter mounted at the front of the draws behind the back seat.

[AB]

Fridge slide

Need to do this one myself!!!!

[Rosco]

Need to do this one myself!!!!

Yea could'nt justify the $300 price tag for a Wacao one. This one cost me about $30 dollars.
I used a old single bed for the angle iron as it has many holes already drilled in it where the springs go which give me holes for screwing down to the timber top.

[AB]

Yea could'nt justify the $300 price tag for a Wacao one. This one cost me about $30 dollars.
I used a old single bed for the angle iron as it has many holes already drilled in it where the springs go which give me holes for screwing down to the timber top.

Cheers for the tip mate. Time to pull apart the family bed...lol

[Rosco]

This shovel holder also doubles as the spare wheel holder, carrier, locator whilst trying to mount the spare.
Again made out of scrap laying around just the cost of Galvanising which I had done with the roof rack and other bits and pieces for the minimum charge.

[Rosco]

This light pole extends up to just above roof height and be rotated 180 deg.

[gregs]

Nice work Rosco. It's amazing what can be done with a few pices of scrap material that most of us have laying around and a bit of ingenuity.

[oncedisturbed]

i likey the work :)

[Tweakedoffroad]

Nice work mate your doing a good job