PDA

View Full Version : 35s for gu?



jimbob22
16th January 2014, 08:15 PM
hey everyone i have just put a 2" tough dog lift kit with 30mm spacers in so now im looking for tyres i was thinking going 35s i was just wondering what people think who have done it i dont want to have to change gear ratios so how do your cars go? cheers

Woof
16th January 2014, 11:02 PM
Hey mate, always a good idea to post up an introduction before asking for any assistance, gets everyone on side from the start

megatexture
16th January 2014, 11:27 PM
What doggy said...

They fit on mine but on flex will rub on the rear inner guards and the plastic fuel filler guard but that can be reshaped with a heat gun .
I have radius arm spacers on mine and they still rub on the front mudflaps when turning but they can be removed.
no idea how much they will rub without radius arm spacers though.
Power loss is not to bad but I wouldn't want to tow on them.

Stropp
17th January 2014, 01:12 AM
What mega said about rubbing, you will also need to remove the front mudflaps and possibly trim the bottom of the front flare depending on wheels and tyres.